Interpretation ID: aiam3597
Board Chairman
Middlekauff
Inc.
1615 Ketcham Avenue
Toledo
OH 43608;
Dear Mr. Bettridge: This is in reply to your petition of July 16, 1982, for a temporar exemption from Federal Motor Vehicle Safety Standard No. 301, *Fuel System Integrity*.; You have told us that 'as a seller and installer of truck bodies, w are frequently called upon to install a body on an incomplete vehicle furnished to us by a major manufacturer through his dealer.' Our regulation on vehicles manufactured in two or more stages (49 CFR Part 568) requires the manufacturer of an incomplete vehicle to furnish, with the vehicle, statements with respect to each of the standards which inform the final stage manufacturer of the vehicle's compliance status. With respect to Standard No. 301, each manufacturer should provide you with a statement of specific conditions of final manufacture under which the completed vehicle will conform or, alternatively, a statement that the vehicle when completed will conform if no alterations are made in identified components of the incomplete vehicle.; These statements afford a basis for your certification of complianc with Standard No. 301 without the necessity of testing. We would like to know which of these statements have been provided and why you may believe your manufacturing operations are such that you could not certify compliance with Standard No. 301.; We would also like to make clear that there is no legal requiremen that you crash test a $10,000 vehicle in order to demonstrate compliance. Certification may be based upon computer simulation, mathematical calculation, or engineering studies. Upon reflection you may decide that you have an adequate basis for certification with Standard No. 301.; Until we hear further from you, we shall hold your petition i abeyance.; Sincerely, Frank Berndt, Chief Counsel