Pasar al contenido principal
Search Interpretations

Interpretation ID: aiam4068

The Honorable Leon E. Panetta, Member, U.S. House of Representatives, 380 Alvarado Street, Monterey, CA 93940; The Honorable Leon E. Panetta
Member
U.S. House of Representatives
380 Alvarado Street
Monterey
CA 93940;

Dear Mr. Panetta: This responds to your request that we review the concerns expressed b one of your constituents, Mr. Joseph Loschiavo, about certain van seats. According to Mr. Loschiavo, the Monterey County Van Program for senior citizens uses vans with seats that are very low and close together, making it difficult for persons to get up out of the seats. He suggested that either the seats be raised about eight inches or that special seats be provided for persons who have problems with the present seats.; The National Highway Traffic Safety Administration (NHTSA) issues moto vehicle safety standards. Federal Motor Vehicle Safety Standard No. 207, *Seating Systems*, establishes requirements to minimize the possibility of seat failure during vehicle collisions. However, NHTSA does not have any standards concerning the height or spacing of van seats.; The Monterey County Van Program has several options in obtaining van with appropriate seating. In purchasing new vans, the Program may either select from among the variety of vans offered by the major vehicle manufacturers, or go to one of a number of companies that customize vans to purchasers' specifications. A number of companies also modify used vehicles.; We note that new vans, including vans which are modified prior to firs sale, are required to be certified to comply with applicable Federal motor vehicle safety standards. The specific certification requirements are set forth at 49 CFR Part 567, *Certification*. If a used vehicle is modified by a business such as a garage, the business is not required to attach a certification label. However, it would have to make sure that it did not knowingly render inoperative the compliance of the vehicle with any safety standard. This is required by section 108(a)(2)(A) of the National Traffic and Motor Vehicle Safety Act. Thus, if a business replaced a van's existing seats with higher seats, it would need to make sure that it was not rendering inoperative the vehicle's compliance with Standard No. 207 or any other Federal motor vehicle safety standard.; I hope this information is helpful. Sincerely, Erika Jones, Chief Counsel