Interpretation ID: aiam4204
Prince Lionheart
2301 Cape Cod Way
Santa Ana
CA 92703;
Dear Mr. McConnell: Thank you for your letter of July 31, 1986, inquiring about the Federa safety standards that apply to roll-up window shades designed to be attached to a vehicle's window by suction cups. The following discussion explains how our safety standards apply to your products.; Some background information on how Federal motor vehicle safety law and regulations affect your product may be helpful. Our agency is authorized, under the National Traffic and Motor Vehicle Safety Act, to issue safety standards applicable to new motor vehicles and certain items of motor vehicle equipment. NHTSA, however, does not approve motor vehicles or motor vehicle equipment, nor do we endorse any commercial products. Instead the Vehicle Safety Act establishes a 'self-certification' process under which each manufacturer is responsible for certifying that its products meet all applicable safety standards. The agency periodically tests vehicles and equipment items for compliance with the standards, and also investigates other alleged safety-related defects. As explained below, installation of products in new and used vehicles would be affected by our regulations. In addition, any manufacturer of motor vehicle equipment is subject to the requirements of the Vehicle Safety Act concerning the recall and remedy of products with noncompliances or defects related to motor vehicle safety.; We have issued Federal Motor Vehicle Safety Standard No. 205, *Glazin Materials*, which specifies performance and location requirements for glazing used in vehicles. These requirements include specifications for minimum levels of light transmittance (70% in areas requisite for driving visibility, which includes all windows in passenger cars).; No manufacturer or dealer is permitted to install solar films and othe sun screen devices, such as the ones described in your letter, in *new* vehicles without certifying that the vehicle continues to be in compliance with the light transmittance and other requirements of the standard.; After a vehicle is first sold to a consumer, modifications to a vehicl are affected by section 108(a)(2)(A) of the Vehicle Safety Act. That section prohibits commercial businesses from tampering with safety equipment installed on a vehicle in compliance with our standards. Thus, no dealer, manufacturer, repair business or distributor can install a sun screen device for the owner of the vehicle, if the device would cause the window not to meet the requirements of Standard No. 205. Violation of the 'render inoperative' provision can result in Federal civil penalties of up to $1,000 for each violation.; Section 108(a)(2)(A) does not affect vehicle owners, who may themselve alter their vehicles as they please, so long as they adhere to all State requirements. Under Federal law, the owner may install sun screening devices regardless of whether the installation adversely affects the light transmittance. Individual States govern the operational use of vehicles by their owners and therefore it is within the authority of the States to preclude owners from using sun screens in their vehicles.; I am returning, under separate cover, the two samples you provided th agency. If you need further information, please let me know.; Sincerely, Erika Z. Jones, Chief Counsel