Interpretation ID: aiam0104
Driver Education Coordinator
Cleveland Public Schools
1380 East Sixth Street
Cleveland
Ohio 44114;
Dear Mr. Seitz: Your letter of July 3, 1968, addressed to Mr. George C. Nield, of th National Highway Safety Bureau has been forwarded to my office for reply.; The installation of dual controls on driver education cars is not *pe se* in violation of the Federal motor vehicle safety standards. However, the secondary equipment must meet the same safety standards established or the primary controls. The secondary steering column must fulfill the same requirements made for the primary column as set forth in Federal Motor Vehicle Safety Standards Nos. 203 and 204. The installation of an additional foot brake must not affect compliance with Standard No. 105. However, duplicate compliance with the control location and identification requirements of Standard No. 101 is not required since the 'driver' of such a vehicle remains the person seated behind the primary controls. For the same reason the 'driver' mirror requirements of Standard No. 111 apply only with respect to the person seated at the primary controls.; Changes may be made to original equipment when necessary fo installation of secondary controls but none of the standards requirements specified may be eliminated or adversely affected by the alteration.; You may make available copies of this letter to dealers and intereste parties.; Sincerely, Eugene B. Laskin, Acting Director, Office of Standard Preparation;