Interpretation ID: aiam2949
P.O. Box 1671
San Angelo
TX 76902;
Dear Mr. Conner: We understand that a question has arisen concerning the testing o 'P-type' tires under the traction grading procedures of the Uniform Tire Quality Grading (UTQG) Standards (49 CFR 575.104(f)(2)). Under the terms of the regulation, candidate tires are to be inflated to 24 psi prior to the traction test (49 CFR 575.104(f)(2)(i)(B) and (D), and (f)(2)(viii)), and are to be loaded to 85 percent of the load specified in Appendix A of FMVSS No. 109 (49 CFR 571.109), for the tires' size designation, at a cold inflation pressure of 24 psi (49 CFR 575.104(f)(2)(viii)). However, Appendix A lists cold inflation pressures for 'P-type' tires in kilopascals, with no stated inflation pressure corresponding precisely to 24 psi.; NHTSA chose 24 psi as the stated inflation pressure for UTQG tractio testing since it represents the recommended tire inflation pressure for most passenger cars. In the situation where no cold inflation pressure exactly equivalent to the specified pressure of 24 psi is stated in Appendix A of FMVSS No. 109 for a tire size designation, the tires to be tested are inflated to the pressure, listed for the tire size designation in Appendix A, which is nearest to 24 psi, *i.e.*, 180 kPa for tires with inflation pressures measured in kilopascals. The tires are then loaded to 85 percent of the load specified in Appendix A for the inflation pressure thus determined. The agency plans to issue an interpretive amendment to the regulation clarifying this point.; Sincerely, Joseph J. Levin, Jr., Chief Counsel