Interpretation ID: aiam1735
Carlton Manufacturing Company
1152 High Street
Central Falls
Rhode Island 02863;
Dear Mr. Danis: This is in response to your letter of October 23, 1974, requesting ou comments on your West Coast type mirror (which includes a ground-in convex spot mirror) and information on Federal regulations for spot mirrors in general.; Standard No. 111, *Rearview Mirrors*, provides minimum performanc requirements for rearview mirrors on passenger cars and multipurpose passenger vehicles. According to the standard, the outside rearview mirror required to be placed on the driver's side of the vehicle must be furnish the driver with a specified field of view to the rear of substantially unit magnification. As long as the mirror is capable of satisfying these field view requirements, the inclusion of a convex spot mirror no the plane mirror (as with the West Coast mirror) is not prohibited by the standard. If your West Coast type mirror is capable of providing the required view of substantially unit magnification independent of its convex spot mirror, it will comply with the standard.; The recent notice proposing to amend the rearview mirror standard (Ma 1, 1974, 39 FR 15143), does not alter the above described permissible use of West Coast type mirrors. No requirements for spot mirrors are contained in the Federal motor vehicle safety standards.; We appreciate your interest. Yours truly, Richard B. Dyson, Acting Chief Counsel