Interpretation ID: aiam1446
2030 Laura Lane
Des Plaines
IL 60018;
Dear Mr. Motyka: This is in reply to your letter of March 11, 1974, asking fo suggestions regarding problems you have experienced with your pickup truck-camper unit.; It appears from your letter that no violations of Federal requirement have occurred. Motor Vehicle Safety Standard No. 126 and its companion Consumer Information requirement (49 CFR S 575.103) about which we wrote to you through Senator Percy's office did not become effective until January 1, 1973, well after the time you bought your vehicle. Moreover, it is not correct to characterize the dealer who sold you the unit as a 'final-stage manufacturer.' Under NHTSA requirements a pickup truck is a completed vehicle, and a person who installs a slide-in camper into the cargo area of a truck does not become a manufacturer. While this is not the case with chassis-mount campers, it is with respect to slide-in campers.; I suggest that if you wish to proceed further you consult an attorney who would be able to best assess your chances of success in civil litigation. The dealer's employee who told you that the 'GVW plate meant nothing' was mistaken. The weight ratings provided on the plate represent the manufacturer's representation of the maximum safe weight of a fully loaded vehicle.; You might wish to examine the labels attached, pursuant to Standard No 126 and 49 CFR S 575.103, to later models of both the pickup truck and camper you purchased. It is possible that those models and the ones you purchased are not substantially different. If that is the case the information on the labels can provide an indication of the extent that the weight ratings were exceeded by installation of the camper unit in question.; While I regret we cannot be of further assistance I wish you success i your efforts to solve this problem.; Yours truly, Richard B. Dyson, Assistant Chief Counsel