Interpretation ID: aiam3251
Product Engineer
Cosco Home Products
2525 State Street
Columbus
IN
47201;
Dear Mr. Gerken: This responds to your letter of March 27, 1980, to Mr. Stephen Oesch o my staff concerning Standard No. 213, *Child Restraint Systems*. You asked whether the labels and installation diagrams required by the standard must comply with Standard No. 302, *Flammability of Interior Materials*. In addition, you asked whether an upholstery tag, required by State law, attached to the seat must comply with Standard No. 302.; Section 5.7 of Standard No. 213 requires 'each material used in a chil restraint system' to conform to the performance requirements of Standard No. 302. Because the label, installation diagram and tag materials are affixed to the child restraint, they would have to comply with Standard No. 302.; Section 4.2.2 of Standard No. 302 provides that 'any material tha adheres to other materials at every point of contact' shall meet the performance requirements of the standard 'when tested as a composite with the other materials.' Thus, if the label, diagram and tag are affixed to the plastic shell of the restraint so that they adhere to the shell at every point of contact, they would be tested with the shell. If the label, diagram and tag do not adhere at every point of contact, section 4.2.1 requires them to meet the performance requirement of the standard when tested separately.; If you have any further questions, please let me know. Sincerely, Frank Berndt, Chief Counsel