Interpretation ID: aiam5129
350 CEP 02712 Sao Paulo
Brazil;
"Dear Mr. Mello: This responds to your inquiry about the exportation o your laminated motor vehicle windshields into the United States. According to your letter, you have already designated an agent in this country and have received your DOT number. You asked whether you are required to perform tests at an American laboratory before you can export your product into the United States. I am pleased to have this opportunity to respond to your inquiry. I am also enclosing a copy of a fact sheet entitled 'Information for New Manufacturers of Motor Vehicles and Motor Vehicle Equipment.' By way of background information, section 103 of the National Traffic and Motor Vehicle Safety Act ('Safety Act,' 15 U.S.C. 1392) authorizes NHTSA to issue safety standards for new motor vehicles and new items of motor vehicle equipment. NHTSA does not however approve or certify any vehicles or items of equipment. Instead, the Safety Act establishes a 'self-certification' process under which each manufacturer is responsible for certifying that its products meet all applicable safety standards. NHTSA tests vehicles and equipment sold to consumers for compliance with safety standards and investigates defects relating to motor vehicle safety. If a manufacturer or NHTSA determines that a noncompliance or safety-related defect exists, the manufacturer must notify purchasers of its product and remedy the problem free of charge. A manufacturer of noncomplying or defective products is also subject to civil penalties. In response to your question about whether you are required to perform tests at an American laboratory, the answer is no. As indicated above, manufacturers of motor vehicles and motor vehicle equipment are required to certify that their products comply with all applicable safety standards. Manufacturers must have some basis for their certification. This does not necessarily mean that a manufacturer must conduct the specific tests set forth in an applicable standard. Certifications may be based on, among other things, engineering analyses, actual testing, and computer simulations. You are not required to use the services of an American laboratory in conducting tests associated with certification. I hope that you find this information helpful. If you have any other questions, please contact Marvin Shaw of my staff at this address or by phone at (202) 366-2992. Sincerely, John Womack Acting Chief Counsel Enclosures";