Interpretation ID: aiam3052
Director
Mini-Comtesse
Z.I. de Saint Barthelemy d'Anjou
BP 815
49008 Angers Cedex
France;
Dear Mr. Hiribarren: This responds to your May 21, 1979, letter asking whether the tw vehicles that you manufacture, the Comtesse and the Super-Comtesse, would be considered as mopeds for the purpose of applying Federal motor vehicle safety standards.; The National Highway Traffic Safety Administration (NHTSA) define motor-driven cycle (moped) as 'a motorcycle with a motor that produces 5-brake horsepower or less.' A motorcycle is defined as 'a motor vehicle with motive power having a seat or saddle for the use of the rider and designed to travel on not more than three wheels in contact with the ground.' Further, the application of some standards to mopeds depends upon their having a maximum speed obtainable in 1 mile of 30 mph or less.; The Super-Comtesse that you manufacture, since it has 4 wheels, woul not qualify as a motorcycle or as a moped. Since this vehicle has many of the aspects of a passenger car, it would be required to comply with the passenger car safety standards. The Comtesse, since it operates on three wheels, would be considered a motorcycle. If the Comtesse meets the other definitional requirements applicable to mopeds, it would be required to comply with the standards applicable to motorcycles or motor-driven cycles.; All Federal motor vehicle safety standards are located in Volume 49 o the Code of Federal Regulations in Part 571. Many of the standards are applicable to passenger cars. Only a few standards apply to motorcycles or motor-driven cycles. I am enclosing a package of information pertaining to the applicability of safety standards to mopeds.; The NHTSA has studied three-wheeled vehicles in the past and has ha serious reservations about the safety of these vehicles. I am enclosing a copy of an agency notice issued on this subject. We hope that your vehicle does not have similar safety problems.; Sincerely, Frank Berndt, Chief Counsel