Interpretation ID: aiam2624
Director of Engineering
American Trailers
Inc.
Box 26568
Oklahoma City
OK 73126;
Dear Mr. McNeil: This responds to your May 25, 1977, letter asking whether two sampl certification labels you submitted comply with the requirements of Part 567, *Certification*, and Standard No. 120, *Tire Selection and Rims for Motor Vehicles Other Than Passenger Cars*.; The National Highway Traffic Safety Administration (NHTSA) does no issue advance approvals of compliance with Federal safety standards or regulations. The agency will, however, give you an informal opinion as to whether your labels appear to comply with the requirements. The two labels you submitted do not follow the format required by Part 567 for certification labels. Therefore, they do not appear to comply with the requirements. Your method of stating tire and rim sizes differs from that required in Part 567 and Standard No. 120. For example, you state your tire and rim information as follows: '10-20-F-Tires-7.5 Rims at 75 PSI Cold Dual.' By the requirements of Part 567 and Standard No. 120 as they apply to certification labels, this information should read: '10.00-20(F) tires, 20x7.5 rims, at 75 psi cold dual.' Further, the statement after GAWR 'maximum with minimum size tire-rims shown below' should be deleted from the certification label. I am enclosing a copy of Part 567 and Standard No. 120 for your information.; Sincerely, Joseph J. Levin, Jr., Chief Counsel