Interpretation ID: aiam0072

Mr. E. C. Dix, Sales Manager, Bert's Truck Equipment, Inc., Highway 2, East Grand Forks, MN 56721; Mr. E. C. Dix
Sales Manager
Bert's Truck Equipment
Inc.
Highway 2
East Grand Forks
MN 56721;

Dear Mr. Dix: Thank you for your letter of April 18, 1968, in which you provide certification information, and presented extra axle modification problems.; Enclosed is a copy of the Federal Motor Vehicle Safety Standards wit chassis-cab information from the Federal Register.; Your certification of compliance concerns compliance of the vehicle a the time of your installation or modification. It does not extend to subsequent additions or modifications by others.; With respect to an old truck body mounted on a chassis-cab which i manufactured on or after January 1, 1968, you are required to bring the lighting into compliance. (See Federal Standard 108 applicable for January 1, 1968.(sic); With regard to lighting requirements for trucks, the corner lights, o side marker and clearance lamp requirements are also provided in the foregoing, enclosed standard.; Your letter is being referred to the engineers responsible fo standards preparation, and the information is appreciated.; Sincerely, Joseph R. O'Gorman, Acting Director, Office of Performanc Analysis, Motor Vehicle Safety Performance Service;