Interpretation ID: 1985-04.50

TYPE: INTERPRETATION-NHTSA

DATE: 12/23/85

FROM: AUTHOR UNAVAILABLE; Erika Z. Jones; NHTSA

TO: Isis Imports

TITLE: FMVSS INTERPRETATION

TEXT:

Mr. William R. Fink President Isis Imports, Ltd. P.O. Box 2290 U.S. Custom House San Francisco, CA 9412

Dear Mr. Fink:

This is in reply to your letter of November 22, 1985, to the former Chief Counsel of this agency, Frank Berndt. Your company, Isis Imports, is an importer of Morgan passenger cars, and has heretofore imported pursuant to 19 C.F.R. 12.80(b)(1)(iii). Upon advice of your attorney you have concluded that you may instead import them pursuant to 12.80(b)(1)(ix), and wish to inform the National Highway Traffic Safety Administration of that fact.

More specifically, under 12.80(b)(1)(iii) an importer declares that his vehicle was not manufactured in conformity with the Federal motor vehicle safety standards, but that it has been, or will be, brought into conformity: he also is required to furnish a bond for the production of a /conformity statement. Under 12.80(b)(1)(ix), the importer simply declares that the vehicle is an "incomplete vehicle" as defined by 49 CFR Part 568; no bond is required as it is assumed that the vehicle will be completed to conform to the Federal safety standards and bear the certification of its final-stage manufacturer. Because the Morgans are received from Morgan Motor Company without "major components of the fuel system; no fuel tank, fuel lines, carburetor, etc.," you believe that they are (incomplete vehicles," which are defined by S568.3 as "an assemblage consisting as a minimum of frame and chassis structure, power train, steering system, suspension system, and braking system, to the extent that those systems are to be part of the completed vehicle, that requires further manufacturing operations...to become a completed vehicle."

We disagree with your conclusion. The rulemaking history of Part 568 clearly shows that the intent of the regulation is to cover vehicles whose manufacture has customarily been shared. As the agency commented in 1970, "A large number of heavy vehicles of all types, of recreational vehicles, and of special purpose vehicles are manufactured in two or more stages, of which the first is an incomplete vehicle such as a stripped chassis, chassis cowl, or chassis cab to which one or more subsequent manufacturers add components to produce a completed vehicle." (35 FR 4639) The Morgan, on the other hand, is a passenger car ordinarily manufactured in a single stage, and in this instance is nonetheless virtually complete when it arrives in the United States. It is therefore a "motor vehicle" within the meaning of 19 CFR 12.80(b)(1)(iii), and the agency will not accept any HS-7 forms evidencing attempts to enter the vehicles pursuant to 12.80(b)(1)(ix).

I enclose copies of a couple of rulemaking proposals on Part 568 so that you might have a better understanding of its thrust. Were we to accept your interpretation, S568.4(a) would require Morgan Motor Company to furnish a document with each vehicle advising Isis how compliance with each applicable Federal motor vehicle safety standard might be affected by its final manufacturing operations. Given the decision of Peter Morgan over the years not to conform his vehicles for the American market, we question whether he would furnish a document attesting that his product complies with all Federal motor vehicle safety standards, except 301, Fuel System Integrity.

Sincerely,

Erika Z. Jones Chief Counsel

Enclosures

November 22, 1985 Frank Berndt, Esq. Chief Counsel NHTSA 400 Seventh Street, S.W. Washington, D.C. 20590

Dear Mr. Berndt:

I write on the advice of counsel to inform NHTSA and your office of a change in our response to Form HS 7. As you may recall, Isis Imports Ltd. is the U.S. outlet for the Morgan motorcar of England. We sell fewer than twenty-five cars a year, and we complete the manufacture of these cars here in San Francisco. (For your reference, I enclose a copy of our earlier correspondence, a brochure and a magazine article.)

We have until now checked Box 3 on Form HS 7. A review by our attorney of our final manufacture of these cars in the context of the applicable regulations, tells us that only a response checking Box 9 is appropriate to our business.

The Morgan chassis, body and engine is received from the Morgan Motor Company less major components of the fuel system; no fuel tank, fuel lines, carburetor, etc. These vehicles are, therefore, according to our attorney, "incomplete vehicles as per 49CFR Part 568.3:

"Incomplete vehicle means an assemblage consisting, as a minimum of frame and chassis structure, power train, steering system, suspension system, and braking system, to the extent that those systems are to be part of the completed vehicle, that requires further manufacturing operations, other than the addition of readily attachable components, such as mirrors or tire and rim assemblies, or minor finishing operations such as painting, to become a completed vehicle.

To: Frank Berndt, Esq.

Since the Morgan cars we sell in the United States operate on a propane fuel system, which is of domestic origin, the addition to the vehicle of this fuel system, as well as implementation of required safety systems, necessitates "further manufacturing operations, other than the addition of readily attachable components" as per 49CFR Part 568.3.

The addition of the fuel tank, in particular, is a fairly detailed manufacturing procedure and without the entire fuel system we add, the car is not a complete vehicle, since it could not be operated. We are aware, of course, of the requirements for "Final Stage manufacturers" as stated in 49 CFR 566 and 49 CFR 568 and are forwarding to the Administrator our identification as a "Final Stage Manufacturer."

Please let us know if your office or your agency require any further information from us. Thank you for your courtesy and cooperation.

Yours sincerely,

W. R. Fink President

WRF:jb

File

CERTIFIED MAIL--RETURN RECEIPT REQUESTED

Mr. William R. Fink President Isis Imports, Ltd. P. 0. Box 2290 US Custom House San Francisco, CA 94126

Dear Mr. Fink:

This is in response to your letter of October 21, 1983 requesting confidential treatment for information which was submitted to the National Highway Traffic Safety Administration (NHTSA) with statements of compliance and which pertained to vehicles imported by Isis Imports, Ltd. into the United States.

In telephone conversations with Heidi Lewis Coleman of my staff, you indicated that you had no objection to the release of HS Forms 189. You requested, however, that submitted drawings, diagrams, specifications and photographs showing the methods and extent of modifications made to Morgan vehicles be treated confidentially by this agency. After carefully reviewing the submitted materials and your justifications I have decided to grant your request in part and deny it in part.

All submitted materials will be afforded confidential treatment with the exception of the photographs. NHTSA does not believe that their release will cause substantial harm to Isis Imports. In order to determine whether release of information will cause such harm, courts consider "how valuable the information will be to the requesting competitors and how much this gain will damage the submitter." Worthington Compressors, Inc. v. Costle. 662 F. 2d 45, 51 (D.C. Cir. 1981).

You indicate that a presumption has been established by 49 CFR Part 512 with respect to blueprints and engineering drawings containing process of production data where the subject could not be manufactured without the blueprints or engineering drawings except after significant reverse engineering. This class determination, however, pertains only to blueprints and engineering drawings; it cannot be interpreted to apply to photographs. Additionally, release of the photographs will not be very valuable to the requesting competitor, and will therefore not cause substantial harm to Isis Imports. Since accompanying diagrams, text and other information will remain confidential, significant reverse engineering will still be required to determine the methods and extent of modifications necessary to bring Morgan vehicles into compliance with Federal standards.

If you wish to submit additional justification explaining why Isis is entitled to confidential treatment for the photographs you must do so within 10 days of your receipt of this letter. At the end of that period, they will be made publicly available. I will notify appropriate agency personnel of this decision, and they will treat your submissions accordingly. Sincerely,

Frank Berndt Chief Counsel