Interpretation ID: 3111yy
Lectric Limited, Inc.
7322 S. Archer Road
Justice, Illinois 60458
Dear Mr. Hanna:
This responds to your letter of July 8, 1991, to Richard Van Iderstine of this agency. You asked whether a proposed manufacturing and marketing scheme would be in violation of any NHTSA regulations.
You intend to petition for rulemaking to amend Standard No. l08 to reinstate SAE Standard J579a as an optional standard for sealed beam headlamps. These lamps would be used on "antique cars." Until SAE J579a is reinstated, you would like to manufacture headlamps to conform to SAE J579c, the current specification for sealed beam headlamps that is incorporated into Standard No. 108. However, you do not wish to mark the lenses with the identification nomenclature that SAE J579c requires (presumably because it was lacking from the J579a headlamps with which the antique cars were originally equipped). You ask if you may market these lamps with identification on the package stating that they are "for display purposes only and not approved for highway use."
Your letter clearly indicates that the purpose of manufacturing the sealed beam headlamps is for their installation on motor vehicles, albeit old ones, and not for "display purposes only." The headlamps are motor vehicle equipment, and must comply with all applicable Federal motor vehicle safety standards, in this instance, SAE J579c. Partial compliance with the requirements is not permissible, and the lenses of headlamps manufactured to conform with SAE J579c must be marked as that standard requires. Thus, your suggested manufacturing and marketing scheme would not conform to Standard No. l08, and, if pursued, it would be a violation of the National Traffic and Motor Vehicle Safety Act.
The manufacture and sale of noncomplying motor vehicle equipment is a violation of the for which a civil penalty of up to $1,000 per violation may be imposed, up to a total of $800,000 for any related series of violations. In addition, as the manufacturer of the equipment, Lectric Limited must certify them as meeting all applicable Federal motor vehicle safety standards, and similar penalties may be imposed for certification that is false and misleading in a material respect. Finally, the manufacturer of nonconforming equipment is required to notify and remedy in accordance with the requirements of the Act.
Because SAE J579a and 579c headlamps are identical in external appearance except for lens marking, we do not believe that authenticity of the appearance of older vehicles will be affected to any discernable degree by requiring that their lenses be marked as the contemporary standard requires.
Sincerely,
Paul Jackson Rice Chief Counsel
ref:l08 d:7/29/9l