Interpretation ID: 7135
Researcher
S.E.A., Inc.
7349 Worthington-Galena Road
Columbus, OH 43085
Dear Mr. Sens:
This responds to your letter to me dated March 26, 1992, in which you sought our interpretation of whether the requirements of Federal Motor Vehicle Safety Standards 206, Door Locks and Door Retention Components; 214, Side Door Strength; and 216, Roof Crush Resistance--Passenger Cars,, applied to a 1985 American Motors Corporation (AMC) Jeep CJ- 7. You stated in your letter that AMC classified the vehicle as a "sport utility vehicle" and that it came with a soft top or an optional fiberglass top, both with removable side doors.
By way of background information, the National Traffic and Motor Vehicle Safety Act of 1966 (Safety Act), 15 U.S.C., 1381, et seq., as amended, authorizes the National Highway Traffic Safety Administration (NHTSA) to issue safety standards for new motor vehicles and items of motor vehicle equipment. All motor vehicles and items of motor vehicle equipment manufactured or imported for sale in the United States must comply with all applicable safety standards. In accordance with 49 CFR 567, Certification, manufacturers of motor vehicles must certify that their products comply with all such standards.
Each safety standard applies to specified "types" of motor vehicles and/or motor vehicle equipment. Motor vehicles are classified into the following types: passenger cars, multipurpose passenger vehicles, trucks, buses, trailers, and motorcycles. A definition for each motor vehicle type is set forth at 49 CFR 571.3. Thus, a 1985 AMC Jeep CJ-7 was required to comply with all safety standards that applied to its vehicle type at the time of its manufacture. In order to determine what safety standards applied to the vehicle, it is first necessary to establish its classification under Part 571.3.
The Safety Act places the responsibility for classifying a particular vehicle in the first instance on the vehicle's manufacturer. For this reason, NHTSA does not approve or endorse any vehicle classification before the manufacturer itself has classified a particular vehicle. NHTSA may reexamine the manufacturer's classification during the course of any enforcement actions.
While AMC may have marketed the 1985 AMC Jeep CJ-7 as a "sport-utility vehicle," it classified it as a multipurpose passenger vehicle for purposes of the Federal motor vehicle safety standards. The term "multipurpose passenger vehicle" is defined in Part 571.3 as "a motor vehicle with motive power, except a trailer, designed to carry 10 persons or less which is constructed either on a truck chassis or with special features for occasional off-road operation." It is our opinion that AMC's classification was appropriate, given that the 1985 Jeep CJ-7 is a 4-wheel drive vehicle with an approach angle of 33o, departure angle of 25o, breakdown angle of 18o, axle clearance of 7.8", and minimum running clearance of 8.1", and thus clearly has special features for occasional off-road operation.
With specific reference to the three standards you inquired about concerning possible applicability to a 1985 AMC Jeep CJ-7, Standards 214 and 216 applied only to passenger cars at the time the CJ-7 was manufactured. See S2 of Standard 214 and and S3 of Standard 216. Since the 1985 AMC Jeep CJ-7 was classified as a multipurpose passenger vehicle and not a passenger car, those two standards, by their terms, did not apply to it.
Standard 206, on the other hand, did apply to multipurpose passenger vehicles as well as passenger cars. However, S4 thereof provided in pertinent part: ". . . [C]omponents on folding doors, roll-up doors, doors that are designed to be easily attached to or removed from motor vehicles manufactured for operation without doors, . . . need not conform to this standard." You indicated that the Jeep CJ-7 came with removable side doors, and we understand that the vehicle was manufactured for operation without doors. Accordingly, the AMC Jeep CJ-7 came within the above-quoted exception to Standard 206 and was not subject to its requirements.
I hope the above information will be helpful to you. If you have any further questions or need additional information regarding this matter, please feel free to contact Walter Myers of my staff at this address or by telephone at (202) 366-2992.
Sincerely,
Paul Jackson Rice Chief Counsel
ref:571#567#206 d:4/17/92