Interpretation ID: 7450
314 Lakeside Drive South
Surfside Beach, SC 29575
Dear Mr. Sharman:
This responds to your letter requesting information about whether the National Highway Traffic Safety Administration (NHTSA) has issued any regulations addressing the retention of records regarding compliance testing results. Your question arises in the context of the testing procedures set forth in Standard No. 302, Flammability of Interior Materials. (49 CFR 571.302).
As explained below, the agency makes available all of its compliance test results through its Technical Reference Division. However, the agency has no such requirements for manufacturers or other persons to keep records concerning any test results. Nevertheless, a manufacturer would be well advised to retain such records in case its motor vehicle or item of equipment did not comply with an applicable safety standard.
By way of background information, the National Traffic and Motor Vehicle Safety Act (15 U.S.C. 1381 et seq., the "Safety Act") gives this agency the authority to issue safety standards applicable to new motor vehicles and new items of motor vehicle equipment. Each of the agency's safety standards specifies the test conditions that this agency will use to assure whether the performance of the vehicle or equipment being tested is in compliance with the safety standard. NHTSA follows the established test procedures and conditions when conducting its compliance testing. The results of NHTSA's compliance tests are always recorded and made available to the public in the agency's Technical Reference Division.
However, the Safety Act does not require a manufacturer to test its products only in the manner specified in the relevant safety standard, or even to test the products at all. A manufacturer may choose any means of certifying that its products comply with the requirements of the safety standards. If the manufacturer chooses to conduct testing, there is no requirement that the manufacturer retain those results.
However, if the agency testing shows that an apparent noncompliance exists with a vehicle or item of equipment, the manufacturer is asked to show the basis for its certification that the vehicle or equipment complies with the relevant safety standard or standards. If, in fact, there is a noncompliance, the manufacturer is subject to civil penalties under the Safety Act unless it can establish that it exercised "due care" in the design and manufacture of the product and in the checks (through actual testing, computer simulation, engineering analyses, or other means) to ensure compliance, but nevertheless did not have reason to know that the vehicle or item of equipment did not in fact comply with the safety standards. Given the potential for civil penalties, it is in the manufacturer's best interests to retain its testing records in case it must establish due care. (See 15 U.S.C. 1397(b)).
I note that the agency has issued a regulation addressing recordkeeping, 49 CFR Part 576, Record Retention, which establishes requirements for the retention by motor vehicle manufacturers of complaints, reports, and other records concerning motor vehicle malfunctions. However, nothing in this provision requires retention of information generated during compliance testing.
I hope this information is helpful. If you have any further questions about NHTSA's regulations, please feel free to contact Marvin Shaw of my staff at this address or by telephone at (202) 366-2992.
Sincerely,
Paul Jackson Rice Chief Counsel
Ref:VSA d:8/12/92