Interpretation ID: 86-4.36

TYPE: INTERPRETATION-NHTSA

DATE: 08/06/86

FROM: AUTHOR UNAVAILABLE; Erika Z. Jones; NHTSA

TO: Ann Boriskie

TITLE: FMVSS INTERPRETATION !PAR=AUTHOR

TEXT:

Ms. Ann Boriskie 6738 Firelight Lane Dallas, TX 75248

Dear Ms. Boriskie:

Thank you for your letter of June 2, 1986, asking for approval of a device you have invented which is designed to prevent children from inadvertently or intentionally opening the buckle of a safety belt. As you requested, the agency will not disclose the details of your proprietary product. Although we understand your concern that young children should not be able to easily get out of a safety belt, we have significant reservations about your product. I hope the following discussion explains those reservations and the effect of our regulations on your product.

Our agency has the authority to issue safety standards applicable to new motor vehicles and certain items of motor vehicle equipment. NHTSA, however, does not approve motor vehicles or motor vehicle equipment, nor do we endorse any commercial products. Instead the National Traffic and Motor Vehicle Safety Act establishes a "self-certification" process under which each manufacturer is responsible for certifying that its products meet our safety standards. The agency periodically tests vehicles and equipment items for compliance with the standards, and also investigates other alleged safety-related defects.

Although we do not have any standards that directly apply to your product, we do have several statutory provisions that could affect it. Manufacturers of motor vehicle equipment such as your device are subject to the requirements in sections 151-159 of the Vehicle Safety Act concerning the recall and remedy of products with defects related to motor vehicle safety. The agency does not determine the existence of safety defects except in the context of a defect proceeding, and thus is unable to say whether your product might or might not contain such a defect. However, the agency is concerned that people be able to easily and quickly operate a safety belt in an emergency. As the agency said last year on the related topic of the force level necessary to operate buckles in child restraints:

The agency's safety concerns over child restraint buckle force release and size stem from the need for convenient buckling and unbuckling of a child and, in emergencies, to quickly remove the child from the restraint. This latter situation can occur in instances of post-crash fires, immersions, etc. A restraint that is difficult to disengage, due to the need for excessive buckle pressure or difficulty in operating the release mechanism because of a very small release button, can unnecessarily endanger the child in the restraint and the adult attempting to release the child. (50 FR 33722, August 21, 1985)

Your product could significantly increase the difficulty of using the buckle release and thus hinder a person attempting to release the belt in an emergency.

In addition, use of your product could be affected by section 108(a)12)(A) of the Vehicle Safety Act. That section prohibits commercial businesses from knowingly tampering with devices or elements of design installed in a vehicle in compliance with the Federal motor vehicle safety standards. We have issued two safety standards which affect safety belts. Standard No. 209, Seat Belt Assemblies, requires the push-button release for a safety belt to have a minimum area for applying the release force. Installation of your device by a commercial business would be prohibited since it completely covers the safety belt push-button. In addition, Standard No. 302, Flammability of Interior Materials, requires new safety belts to meet a flammability resistance requirement. Thus, although Standard No. 302 does not directly apply to aftermarket equipment, commercial businesses could not install your device if it would mean that a safety belt no longer met the flammability resistance requirements of Standard No. 302.

The prohibition of section 108(a)(2(A) does not apply to individual vehicle owners who may install or remove any items of motor vehicle equipment regardless of its effect on compliance with Federal motor vehicle safety standards. However, our policy is to encourage vehicle owners not to remove or otherwise tamper with vehicle safety equipment. Installation of your product by any person would be inconsistent with that policy.

I am returning, under separate cover, the samples of your device that you sent the agency. If you have any further questions, please let me know.

Sincerely,

Erika Z. Jones Chief Counsel