Interpretation ID: nht95-7.66

TYPE: INTERPRETATION-NHTSA

DATE: December 22, 1995

FROM: Samuel J. Dubbin -- Chief Counsel, NHTSA

TO: David T. Zelis -- Marketing Manager, Buyers Products Company

TITLE: NONE

ATTACHMT: 11/13/95 letter from David T. Zelis to Office of Chief Counsel, NHTSA

TEXT: This is in response to your letter of November 13, 1995, forwarding literature concerning The Pintle Mount Bumper, which you describe as a new product being offered by your company that is designed to take the place of a vehicle bumper and the receiver tube assembly on a light duty truck. In a telephone conversation with Coleman Sachs of my staff on November 22, 1995, you described this bumper as an aftermarket product that will not be supplied as original equipment on new motor vehicles. You have requested copies of any standards issued by the National Highway Traffic Safety Administration (NHTSA) that may apply to the use or manufacture of this product.

NHTSA has issued Federal motor vehicle safety standards, found at 49 CFR Part 571, and a Bumper Standard, found at 49 CFR Part 581. None of these standards apply to the product that is the subject of your inquiry.

The Bumper Standard applies only to vehicles and not to bumpers sold as items of replacement equipment. Moreover, as stated in 49 CFR 581.3, the only vehicles to which the Bumper Standard applies are "passenger motor vehicles other than multipurpose passenger vehicles." The term "passenger motor vehicle" is defined for purposes of the Bumper Standard at 49 U.S.C. @ 32101 (10) as

a motor vehicle with motive power designed to carry not more than 12 individuals, but does not include- (A) a motorcycle; or (B) a truck not designed primarily to carry its operator or passengers.

Because the light duty pickup trucks for which your product is designed do not fall within this definition, the Bumper Standard does not apply to those vehicles.

The Federal motor vehicle safety standards (FMVSS) apply only to new motor vehicles and items of replacement equipment. Because your bumper is only being sold as aftermarket equipment, it could not affect the compliance of new motor vehicles with the FMVSS. Moreover, there are no FMVSS that would apply to your bumper as a replacement equipment item.

Under 49 U.S.C. @ 30122(b), a motor vehicle manufacturer, distributor, dealer, or repair business is prohibited from "knowingly mak[ing] inoperative any part of a device or element of design installed on or in a motor vehicle . . . in compliance with an applicable motor vehicle safety standard . . ." This provision would be violated if any of the entities to which it refers installed your bumper on a vehicle and, as a result of that installation, the vehicle no longer complied with any applicable FMVSS. For example, the installation of an aftermarket bumper could affect a vehicle's compliance with FMVSS No. 108, Lamps, Reflective Devices, and Associated Equipment, if the bumper obscured any lights or other equipment required by the standard.

Because your bumper is sold as "an addition to a motor vehicle," it meets the definition of "motor vehicle equipment" in 49 U.S.C. @ 30102(a)(7)(c). As the manufacturer of such equipment, you are responsible under 49 U.S.C. @ 30118 for furnishing NHTSA and anyone purchasing your bumper with notification of, and a remedy for, any defect relating to motor vehicle safety that is determined to exist in the bumper.

If you have any further questions regarding this matter, feel free to contact Coleman Sachs of my staff at the above address, or by telephone at (202) 366-5238.